| Customization: | Available |
|---|---|
| Type: | Rotary Encoder |
| Working Principle: | Incremental |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1.Electrical Characteristics For Rotary Encoders | |
| 1.1 Rated Power: | DC 16V 0.5A (1 mA Min.) |
| 1.2 Contact Resistance: | 100Ω Max at DC 5V,1mA |
| 1.3 Insulation Resistance: | More than 100MΩ at 250V for 1 minute |
| 1.3 Switching Travel: | 0.5±O.3mm |
| 1.4 Operating Force: | 6+2.5/-2N (610+255/-200 gf) |
| 1.5 Withstand Voltage: | 300V AC, 1mA for 1min. |
| 1.6 Switch Life: | 20,000 Cycles Min |
| 2.Mechanical Characteristics | |
| 2.1 Rotational Torque: | 30 ~ 100gf.cm |
| 2.2 Total Rotational Angle: | 360° Continuous |
| 2.3 Push-Pull Strength of shaft: | 10Kgf Min. for 10 Sec |
| 2.4 Bushing & nut tight strength: | 10.0Kgf.cm Min |
| 3.Endurance Characteristics | |
| 3.1 Rotational Life: | 15,000 Cycles Min. |
| 3.2 Operating Temperature: | -40°C ~ +85°C |
| 3.3 Dry heat: | 5±3°C for 240±1Ohr. |
| 3.4 Cold:: | -40±3°C for 240±10hr |
| 3.5 Damp Heat: | -40±2°C, 90-95% RH, 240±1Ohr. |
| 3.6 Resistance to Soldering Heat: | Dip soldering: preheat within 100°C for 2Min; Soldering Temp. is 260±5°C for 5 sec. Manual Soldering: 300±5°C for 3 sec. |
){kind=link}