Absolute Manual 12mm Rotary Encoder Module with Demo Code Sensor Incremental Shaft Encoder 24V

• Customization: Available
• Type: Rotary Encoder
• Working Principle: Incremental
• Model NO.: RE1101
• Readout Mode: Contact
• Operating System: Contact Brush Type
• Signal Output: Complementary Push-pull Output
• Axle Sleeve Type: Empty Type
• Package: DIP
• Installation Form: Axle Sleeve Type
• Brand: BS
• Axonia: Clamping Flange Type
• RoHS: 100%
• Certificate: ISO9001, ISO14001, Ts16949
• Transport Package: Plastic Box, Carton
• Specification: 11MM
• Trademark: BS
• Origin: China
• HS Code: 85334000
• Production Capacity: 30000PCS/Day

Product Description

Encoder, rotary encoders, incremental encoder, audio encoder

Bosin electronics is a manufacturer specializing in rotary encoders, potentiometers and switches. Our company passed ISO9001, ISO14001, ISO/TS16949.

Please check below specification.

1.Electrical Characteristics for rotary encoder
1.1 Rated Power:	DC 16V 0.5A (1 mA Min.)
1.2 Contact Resistance:	100Ω Max at DC 5V,1mA
1.3 Insulation Resistance:	More than 100MΩ at 250V for 1 minute
1.3 Switching Travel:	0.5±O.3mm
1.4 Operating Force:	6+2.5/-2N (610+255/-200 gf)
1.5 Withstand Voltage:	300V AC, 1mA for 1min.
1.6 Switch Life:	20,000 Cycles Min
2.Mechanical Characteristics
2.1 Rotational Torque:	30 ~ 100gf.cm
2.2 Total Rotational Angle:	360° Continuous
2.3 Push-Pull Strength of shaft:	10Kgf Min. for 10 Sec
2.4 Bushing & nut tight strength:	10.0Kgf.cm Min
3.Endurance Characteristics
3.1 Rotational Life:	15,000 Cycles Min.
3.2 Operating Temperature:	-40°C ~ +85°C
3.3 Dry heat:	5±3°C for 240±1Ohr.
3.4 Cold::	-40±3°C for 240±10hr
3.5  Damp Heat:	-40±2°C, 90-95% RH, 240±1Ohr.
3.6 Resistance to Soldering Heat:	Dip soldering: preheat within 100°C for 2Min;  Soldering Temp. is 260±5°C for 5 sec.  Manual Soldering: 300±5°C for 3 sec.