| Customization: | Available |
|---|---|
| Type: | Rotary Encoder |
| Working Principle: | Incremental |
|
Still deciding? Get samples of US$ 30/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 1.Electrical Characteristics for encoders | |
| 1.1 Rated Power: | DC 5V, 2.5mA(1mA Min) |
| 1.2 Contact Resistance: | 10Ω Max at DC 5V,1mA |
| 1.3 Insulation Resistance: | More than 100MΩ at 250V for 1 minute |
| 1.3 Withstand voltage: | AC 300V for 1 minute |
| 1.4 Number of detent: | 20 detents (Angle: 18±° 3°) |
| 1.5 Resolution: | 10 Pulses/360°for each phase. Chattering 3ms Max |
| 1.6 Phase-difference: | Td=T/4±T/6(in case of no detent) |
| 2.Mechanical Characteristics | |
| 2.1 Rotational Torque: | 20 ~ 250gf.cm |
| 2.2 Total Rotational Angle: | 360° Continuous |
| 2.3 Push-Pull Strength of shaft: | Pull :10.0Kgf Min; Push: 10.0Kgf Min |
| 2.4 Bushing & nut tight strength: | 10.0Kgf.cm Min |
| 3.Endurance Characteristics | |
| 3.1 Rotational Life: | 50,000 Cycles Min. |
| 3.2 Load Life: | 50,000 Cycles Min with load. |
| 3.3 Dry heat: | 70C° ,240±10H,CR is 10Ω Max; IR 10MΩ Min at DC250V. |
){kind=link}