|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Resistance: | Variable Resistor |
| Function for Resistance: | Protective Resistor, Load Resistor, Shunt Resistor, Sampling Resistor |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ELECTRICAL CHARACTERISTICS | ||
| Total Resistance | 10K Ω±20% | |
| Resistance Taper | A, B,C,D,E,MN,RD, W, | |
| Max. Operation Voltage | Linear Taper B :AC 200 V~DC / V | |
| Other Tapers :AC 150 V~DC / V | ||
| Rated Power | Single unit: Linear taper B:0.2W, Other tapers : 0.05W | |
| Dual unit: Linear taper B:0.1W, Other tapers :0.025W | ||
| Sliding Noise | Less than 100 mV | |
| Insulation Resistance | More than 100 MΩ at DC 250 V | |
| Withstand Voltage | 1 minute at AC 300 V | |
| Residual Resistance | Term. 1~2 :Less than 10 Ω | |
| Term. 2~3 :Less than 10 Ω | ||
| Gang Error (Dual Unit) | -40 dB ~ 0 dB ± 3dB | |
| MECHANICAL CHARACTERISTICS | ||
| Total Sliding Travel | 60.0 mm ± 0.5 mm | |
| Operating Force | 10 ~ 100 gf | |
| Sliding Stopper Strength | 5.0 Kgf.cm Min. | |
| Push-Pull Strength | 3.0 Kgf.cm Min . at 5 sec 10 sec | |
| Number of Detents (Click) | 1C (Center Detent ),7C,11C,21C,41C | |
| Click Slip-Out Force | / ~ / gf | |
| Resistance to soldering heat | Solder dip: | |
| Preheating condition: Surface temperature of the substrate shall be settled within 100ºC in one min. | ||
| Solder temperature 260±5ºCfor 5 sec. | ||
| Manual Soldering: Less than 300ºC and quicker than 3 seconds. | ||
| Sliding Life | 10,000 Other / (Cycles Min.) | |
){kind=link}